Job Vacancies

Other Water Network Products

Hydrant Cap c/w Quick Fit

Hydrant Cap c/w Quick Fit

The London Round Thread (LRT) Hydrant Cap is cast in Aluminium alloy and powder coated (WRAS approved). Complete with nickel female quickfit coupling to enable pressure readings to be taken direct from the hydrant. Supplied with plastic filter nut and nitrile rubber gasket.

Coil Hose

Coil Pressure Hose

The Coil Pressure Hose has an impressive pressure rating of 15Bar. It comes complete with male and female quick-fit connections for use with telemetry instruments, plus 1 metre working length manufactured from blue nylon.

Firemaster Flow Meter

Firemaster Flow Meter

The Firemaster Flow Meter combines a flow sensor and an electronic board with display in a splash proof plastic IP65 enclosure.
 
This lightweight (4.7kg) unit has a marine anodised alloy body and is simple to operate, the day to day operation can be done with a simple push of a button.

Single Head Swivel Standpipe

Single Head Swivel Standpipe

ADR offer a single head swivel mechanical metered standpipe c/w double check valve and test port. Suitable for Councils, contractors, developers etc. Wherever you need the water supply measured and protected. Standard colour is silver, but can be painted to your specifications.

Magflow Krohne IFC050

Magflow Krohne IFC050

The electromagnetic signal converter IFC 050 is a perfect choice for measuring volumetric flow  in various kinds of applications in the water industry but also in the food and beverage business. 
 
The signal converter can be combined with the flow sensors OPTIFLUX 1000, 2000, 4000, 5000,  6000 and the WATERFLUX 3000. The output represents measured values for flow, mass and conductivity. 

Magflow Krohne IFC070

Magflow Krohne IFC070

The Krohne IFC070 is a battery powered electromagnetic water meter with optional FlexPower. The flow converter with the RS485 interface, is able to communicate with an external device (PC or other suitable computer system) using the Modbus protocol. This option allows data exchange between PC or computer and single or multiple devices.

Magflow Krohne IFC100

Magflow Krohne IFC100

The Krohne IFC100 is a signal converter for electromagnetic flowmeters, featuring
  • Extended accuracy option 
  • Diagnostics of device and application 
  • Certified for use in hazardous areas

Krohne OptiFlux 1000 Meter

Krohne OptiFlux 1000 Meter

The flangeless OPTIFLUX 1000 electromagnetic flow sensor is compact and lightweight. The design is robust with the highly resistant, reinforced PFA liner and Hastelloy® electrodes.
 
This offers an excellent chemical resistance. The device is a cost-efficient and reliable solution for a wide range of applications. For industries varying from HVAC, water and wastewater, agriculture, utilities and from fire-fighting to machine building.

Krohne Optiflux 2000 Meter

Krohne Optiflux 2000 Meter

The OPTIFLUX 2000 electromagnetic flow sensor is the optimum solution for water and wastewater applications.
 
Its long-term reliability and durability make it the standard flow sensor for the water industry for measuring abstraction water, drinking water, wastewater, sewage and effluent.

Krohne WaterFlux 3070 Meter

Krohne WaterFlux 3070 Meter

Battery powered electromagnetic water meter with optional KROHNE FlexPower
  • Battery power or optional mains power & battery backup with the FlexPower
  • Easy installation without straight inlet or outlet lengths
  • Integrated pressure and temperature sensor

Locakable Ball Valve-1

Locakable Ball Valve

A robust maintenance free full bore valve with low pressure loss suited to mains tapping, path, meter cock and above ground water meter installations. The stainless steel ball which operates within two rubber seals is rotated a 1/4 turn to fully open or closed positions onto positive solid stops by the actuator spindle.

Maric Flow Control Valve

Maric Flow Control Valve

The Maric Flow Control Valve has been developed to provide a constant pre-set flow rate irrespective of pressure or pressure fluctuations. 

Valves are available in a range of body and elastomer materials and consist of:
  • A body manufactured to rigid engineering standards
  • A precision machined recess for the control rubber
  • And a pressure sensitive control rubber meticulously compounded to pass exacting flow tests

ADR - Website - Other Water Network Products (2)

Dual Check Backflow 15mm-20mm

We supply 15mm and 20mm Dual Check Valves to meet AS/NZS 2845.1 1998 for Low Hazard conditions. Housed in a tail to the same dimension as originally supplied with our PSM meters for ease of retro fitting.

ADR - Website - Other Water Network Products (3)

Non-Testable Dual Check Backflow 25mm - 50mm

Dual Check Valves are utilised for protection from cross contamination of non potable water with potable water. They are used in low hazard conditions such as rain water tank systems and domestic meter connections.

ADR - Website - Other Water Network Products (1)

350 Wilkins BM - Small Backflow 20mm - 50mm

Designed for installation on potable water lines. Protects against both back siphonage and back pressure of polluted water into the water supply.

  • Assembly provides protection where a potential health hazard does exist (Medium Hazard).
  • The Double Check Valve Backflow Preventer is Australian/NZ Watermark Approved (AZ/NZS 2845.1).
  • The Double Check Valve Backflow Preventer is rated to 82°C.
  • The Double Check Valve Backflow Preventer is supplied with female pipe thread tail pieces.
  • The main body is Bronze for sizes 20mm and 25mm, and Nylon for sizes 32mm to 50mm.
  • The housing is reinforced Nylon and the seat disc elastomer’s are silicone.
  • The first and second checks are accessible for maintenance without removing the device from the line.

350 Wilkins Backflow 65mm – 300mm

350 Wilkins Backflow 65mm - 300mm

Designed for installation on potable water lines to protect against both backsiphonage and backpressure of polluted water into the potable water supply. The Model 350 shall provide protection where a potential health hazard does not exist. Ideal for use where lead-free* valves are required.

350DA Wilkins Backflow 65mm – 250mm

350DA Wilkins Backflow 65mm - 250mm

Designed for installation on potable water connections in fire sprinkler systems to protect against both backsiphonage and backpressure of polluted water into the potable water supply. Model 350DA provides medium level protection where a potential health hazard exists. Incorporates metered by-pass to detect leaks and unauthorized water use.

375 Wilkins RPZ Backflow 65mm – 250mm

375 Wilkins Backflow 65mm - 250mm

Designed for installation on potable water lines to protect against both backsiphonage and backpressure of contaminated water into the potable water supply. The Model 375 provides protection where a potential health hazard exists. Ideal for use where lead-free* valves are required.

375DA Wilkins RPZ Backflow cw by-pass 65mm – 250mm

375DA Wilkins RPZ 65mm - 250mm

The Model 375DA shall provide protection where a potential health hazard exists. It incorporates metered by-pass to detect leaks and unauthorized water use, and designed for installation on potable water lines in fire protection systems to protect against both backsiphonage and backpressure of contaminated water into the potable water supply. 

Related Blogs

Latest industry insights from the best

Drop us a line

We'd Love to Hear from You!