Eaton Cooper Power Systems

Type Form 6 Recloser Control

Form 6 Recloser Control

Eaton’s Cooper Power series Form 6 recloser control is designed to be a flexible, easy-to-use control that has been built to the specifications of utility crews, service technicians and field operators. It provides important service restoration operations, with instant access to operating functions to quickly determine the status of a device, locate faulted phases, check counters and find other critical information.

NOVA Recloser

NOVA Recloser

Eaton's Cooper Power series NOVA recloser is a three-phase, vacuum-interrupting recloser that successfully combines four patented technologies: cycloaliphatic-epoxy encapsulation, high-performance vacuum interrupter, dependable lower power mechanism and an automated microprocessor recloser control. The solid polymer insulation is highly resistant to ozone, moisture, contamination, ultra-violet light and tracking. The axial-magnetic contacts are ideal for encapsulation and the dual-coil actuator provides for years of rugged performance. 

V4H Single Wire Earth Return (SWER) Recloser

V4H Single Wire Earth Return (SWER) Recloser

Eaton's Cooper Power series V4H, V4E and V4L single-phase, hydraulically controlled reclosers provide reliable, self-contained overcurrent protection. They’re offered at low initial cost and require minimal service.

cl-7-single-phase-control

CL-7 Voltage Regulator Control

Eaton’s Cooper Power series CL-7 voltage regulator control maintains the easy-to-use interface of previous CL controls, but with advanced smart grid, features are designed with the future in mind. It comes as standard equipment on Eaton’s Cooper Power series voltage regulators, but can be applied to operate nearly any voltage regulator in service today. These advanced control features single-phase and multi-phase versions.

Single-phase overhead Voltage Regulator

Single-phase overhead Voltage Regulator

Eaton's Cooper Power series voltage regulators provide state-of-the-art voltage regulation by utilising the advanced CL-7 voltage regulator control and Quik-drive tap changers. The combination of advanced control technology and the fast response tap-changer apparatus is unparalleled in the industry.

Pad-mount Voltage Regulator

Pad-mount Voltage Regulator

Eaton's Cooper Power series pad-mounted voltage regulators provide state-of-the-art voltage regulation while reducing installation costs and preserving site aesthetics. The pad-mounted voltage regulator, in conjunction with pad-mounted transformers and switchgear, can be used to create low-profile modular substations. These low-profile substations will be unobtrusive and can usually be installed without fencing and possibly in shared rights-of-way locations. Pad-mounted voltage regulator offerings include single-phase, 2-in-1 and 3-in-1 versions.

Padmount Vacuum fault Interuptor (VFI) Switchgear

15kV to 35kV Pad-mount Vacuum Fault Interrupter Switchgear (VFI)

Eaton's Cooper Power series VFI vacuum fault interrupter switchgear provides an environmentally preferred, safer and more reliable approach to medium-voltage switching and protection. Additionally, it features dead-front construction and enhanced operating features for added safety, all completely immersed within a sealed, insulated medium.

Leader Follower Scheme for Single Phase Step Voltage Regulators

Pole Top Power Capacitor

Eaton's Cooper Power series comprehensive pole-mounted capacitor bank solutions can be tailored to meet customer application needs. This customised bank package offers overall system improvements such as improved power factor, system capacity release, loss reduction, voltage stability, improved power flow, and cost savings.

Pole Top Power Capacitor

Padmount Power Capacitor

Eaton's metal-enclosed, pad-mounted capacitor banks, a Cooper Power™ series product, are self-contained devices which offer a simple and economical approach to reactive power compensation of underground distribution systems up to 25 kV and 150 kV-BIL. Metal-enclosed, pad mounted capacitor banks come pre-assembled and ready to be installed and “plugged-in” resulting is substantial labor savings over an open style capacitor bank. Eaton's pad-mounted capacitor banks are designed to meet or exceed all applicable ANSI®, IEEE®, NEMA®, and IEC standards.

Padmount Power Capacitor

Substation Power Capacitors

Eaton's comprehensive line of Cooper Power series open-air bank solutions are available in externally fused, fuseless or internally fused designs. Each design is custom-configured in a variety of parallel/series combinations to meet a full range of application needs based on kvar requirements, system voltage, protection strategy and system solutions. Open air banks provide economical and reliable methods for reducing losses and improving power quality.

Substation Power Capacitors

Medium Voltage Utility Fuses

Eaton’s Cooper Power series current-limiting fuses provide overload protection for all overhead, indoor and underground cable distribution systems and are used for transformer protection, capacitor protection and sectionalising. They have become integral parts of many distribution systems because of their desirable characteristics of noiseless interruption, no expulsion violence, current-limiting action and very high current-interrupting capability.

Medium Voltage Utility fuses

Lightning / Surge Arresters

Eaton’s Cooper Power series distribution arresters provide superior overvoltage protection for any electric distribution system. They have set the standard for design and manufacturing of polymeric distribution-class arresters up to 36 kV.

Lightning Surge Arresters

Station-Class Surge Arresters

Eaton's Cooper Power series polymer- and porcelain-housed intermediate and station-class surge arresters feature enhancements in arrester design, including increased cantilever strength and improved energy handling capability.

Drop us a line

We'd Love to Hear from You!