Aspex is an easy to use, cost-effective SCADA HMI software package allowing the custom design of graphical screens for use with Abbey Systems Telemetry products. Designed for water and wastewater utilities, power and gas distribution networks.

Powerlink is Abbey Systems' Telemetry Server software and is supplied bundled with Aspex into six different packages:

• Aspex Full  - 100 RTU addresses, 500 programs.

• Aspex Standard  - 100 RTU addresses, 250 programs.

• Aspex Lite  - 25 RTU addresses, 100 programs.

• Aspex Superlite - 7 RTU addresses, 25 programs.

• Aspex Local Operator  - 1 RTU, trends, programs & reports. No alarm system.

Powerlink is also available in the following versions:

• Powerlink Telemetry Server - with OPC Server interface for customers who want to use Abbey Systems RTUs with remote configuration, synchronous data transmission or Datalogging features, but still interface to Intouch, iFix, Citect or other HMIs with an OPC client.  

• Powerlink Local Master - for customers to configure RTUs using DNP3 slave serial or DNP3/TCP protocols to communicate with their SCADA Master.

Powerlink is Abbey Systems' Telemetry Server software and is supplied bundled with Aspex into six different packages:

• Aspex Full  - 100 RTU addresses, 500 programs.

• Aspex Standard  - 100 RTU addresses, 250 programs.

• Aspex Lite  - 25 RTU addresses, 100 programs.

• Aspex Superlite - 7 RTU addresses, 25 programs.

• Aspex Local Operator  - 1 RTU, trends, programs & reports. No alarm system.

Abbey Secure Link software provides a safe and secure means of allowing customers remote access to their SCADA Master and its data, either from an existing Broadband Internet Service Provider or via a Cellular Data 3G/4G connection.  Abbey Secure Link is designed to provide a high level of security and ease of use without the hassle of a VPN.

SCADA Gateways provide a communications interface between the SCADA Master PC and the radios communicating with remotes (RTUs) in the field. Abbey Systems SCADA Gateways replace the discontinued older Modulink System Controllers and Master Communicators previously used for this task and now use IP instead of a serial connection to the PCs. Two different SCADA Gateway models are available depending on whether single or multiple radio channels are involved.

Powercat is an Industrial modular RTU designed specifically for Electrical Power Distribution substation applications with Opto Isolated Digital Inputs and Relay Outputs providing high levels of isolation.  

Powercat RTU flexibly fits into existing SCADA systems with ease, collecting and concentrating data from Energy meters, Protection Relays, Transformer Relays, PLCs & PSUs, including Discrete connected I/O returning it to the SCADA Master or for internal logic control.

Feeder Line Automation Remote Terminal Units

Power industry feeder line automation RTUs with high levels of electrical isolation and relay outputs for Ring Main Units, Switches, Voltage Regulators and small substation telemetry applications.

Abbey Systems Swampfox is an integrated RTU, designed as a "single box solution" to simplify installation and maintenance for water and wastewater pumping stations and small Treatment Plants.

Swampfox contains a 32bit CPU with Ethernet and serial ports, I/O card + analog loop supply, internal radio or external radio interface, PSU and internal 2500mA/Hr NiMH battery.  

For Swampfox & Topcat RTUs.
Includes an RJ45 cable to connect with a Swampfox RTU.
Plugs into the serial port and gives 4x 0-20mA or 4-20mA outputs.
Part No. B05-037-01